We have been having a lot of folks inquiring about converting their
manual Taig mill into a CNC mill. The basic parts you will need to do
this are the STDR-4C control kit, Taig stepper coupler kit and
depending on the age of your mill the CNC type lead screw nuts. To make
the process easier we have created a page where you can order all the
parts you need in one place.
We are also offering the same options for the CNC Upgrade Kit as we do
for our complete Taig CNC machine packages. You can choose the type of
interface you want as well as upgrade to the Option Kit A.
NOTE: Please look at your lead screw nuts. If you have the
split/adjustable which has a slit in one side and three small screws (see
the pictures here) then you do not need new lead screw nuts. If you
do not have the split/adjustable nuts then you will need the 'CNC Lead
We also offer complete Taig CNC systems with our rugged STDR-4C
controller. See the link at the bottom of the page for details.
Taig Mill CNC Upgrade Basic Kit
Also check the options tab for our Starter Kits which
offer a bigger savings. Not sure what you need. Feel free to contact us for a
quote on a system customized for your needs.
Taig Mill Starter Kit A
Taig Ready Rotary Table Kit
We teamed up Sherline's tough rotary table with the
proper mounts, tailstock, stepper motor and cable for the Taig mill.
You can add the rotary table kit to your system as well. The stepper
motor is set up to plug into the STDR-4C.
Not sure what is right for you? Let us create a starter kit just
for you. Give us a call or drop us an email and let us know what your
looking for and what type of work you will be doing. We will work with
you to come up with a package that works for your needs.